|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
 |
|
 |
|
 |
|
 |
| The super-thin sensor detects
pressure balance in real time! |
|
|
 |
|
| · |
The portable system
is useful for field work. |
| · |
Pressure balance
is displayed in easy-to-see bar charts. |
| · |
Because squeegee
load value and balance are displayed in real
time, printer adjustment is simplified. |
| · |
The sensor sheet
thickness is about 0.25 mm, providing measuring
conditions extremely close to actual field
conditions. |
| · |
This system reduces
initial machine adjustment time and defect
ratio, contributing to yield improvement.
|
| · |
The sensor provides
two levels of sensitivities. |
| · |
The reusable sensor
sheet is cost-saving. (Note 1) |
| · |
This system is
superior to the conventional Squeegee Scan
III in terms of speed, accuracy and operability.
|
|
|
 |
|
| ·Surface
mounting technology (SMT) |
·Liquid
crystal display (LCD) |
·Plasma
display (PDP) |
| ·Hybrid
IC (HIC) |
·Flexible
board |
·Solar
battery |
| ·Printed
circuit board (PCB) |
·Multilayer
capacitor |
·Printing
machinery, etc. |
|
|
 |
|
| Sensor connector |
| Resolution |
256
steps (8 bits) |
| Sampling
rate |
about
2 frames/sec. (2 Hz) |
External
dimensions
(excluding projections) |
W
: 57 mm, D : 135 mm, H : 35 mm |
| Weight |
about
280 g |
|
|
| Interface box |
External
dimensions
(excluding projections) |
W
: 157 mm, D : 93 mm, H : 45 mm |
| Weight |
about
300 g (excluding dry cell batteries) |
| Power
source |
Four
AA dry cell batteries |
|
|
| Sensor sheet (Option) |
| Name |
LINE-170 |
LINE-320 |
LINE-600 |
| External
dimensions |
Overall
width |
180
mm |
340
mm |
620
mm |
| |
Overall
length |
380
mm |
500
mm |
500
mm |
| Thickness |
0.25
mm |
| Matrix |
Sensor
part |
2
lines × 33 columns |
| |
Display |
1
line × 11 columns |
| Sensing
area |
12
× 160 mm |
12
× 307 mm |
12
× 576 mm |
| Column
pitch |
Sensor
part |
5
mm |
9.6
mm |
18
mm |
| |
Display |
15
mm |
28.8
mm |
54
mm |
| Measuring
range (Note 2) |
Lo
(Low sensitivity) *1 |
3
to 30 N/cm |
2
to 20 N/cm |
2
to 20 N/cm |
| |
Hi
(High sensitivity) *2 |
1
to 10 N/cm |
0.5
to 5 N/cm |
0.5
to 5 N/cm |
|
| *1,
2: |
The
measuring range slightly varies depending
on the squeegee material, hardness and
angle. |
| *2 |
"Hi" (High sensitivity) is
intended to measure initial squeegee
contact. It cannot be used for actual
load measurement. |
|
|
| Software |
| Major
functions of Palm software |
Histogram
display (11 bars), total load display,
fluctuation coefficient display, target
load setting and OK/NG judgment function,
snap shot saving, saved data reproduction,
sensitivity correcting (calibration)
function, etc. |
| Functions
of Windows software |
The
data transferred from the Palm device
to a PC through HotSync are converted
into FXS format data or ASCII format
data. |
|
|
|
 |
|
| Standard configuration |
| Palm
device * (Note 3) |
1
unit |
| Dedicated
cable * |
1
piece |
| Sensor
connector * |
1
piece |
| Interface
box * |
1
piece |
| Software |
CD-ROM
1 piece |
| System
hard case |
1
piece |
| Operation
manual |
1
volume |
| AA
dry cell battery* |
4
pieces |
|
|
| Option |
| Sensor
sheet (Note 4) |
- |
| Calibration
device |
- |
| Calibration
jig |
- |
| System
soft case |
- |
|
|
|
 |
|
| Palm device (Note 5) |
| CPU |
Dragonball
series, ARM series |
| OS |
3.5
or higher version |
| Interface |
Serial
interface (Fully compatible with RS-232C) |
|
|
| PC |
Conform to the manual for the
Palm device.
The "Palm ToWin.exe" software that
enables backup data to be used on a PC is
compatible with Windows only. To reuse the
backup data on a PC, use an IBM PC/AT-compatible
PC. For OS, use any of Windows 98/Me/2000/XP. |
|
|
 |
| The
equipment marked with an asterisk can be used
for both "Roller Scan" and "Nip
Scan". |
| (Note
1) |
The
sensor sheet durability varies depending on
the operating environment and frequency. |
| (Note
2) |
The
saturated pressure is based on the NITTA original
pressurizing method. It does not indicate
a measuring range. |
| (Note
3) |
Use
an appropriate Palm device distributed at
the time of system sales. For details, contact
NITTA CORPORATION when you purchase it. |
| (Note
4) |
The
sensor sheet service life varies depending
on the operating environment and frequency.
At the time of purchase, specify the number
of sensor sheets required. |
| (Note
5) |
Operation
of the Palm device can be guaranteed only
when the device included in the standard configuration
is used. |
|
Windows
98/Me/2000/XP are registered trademarks of
Microsoft, U.S.
Other product names given in the text are
registered trademarks, trademarks or brand
names of individual companies. |
|
|
|
|
 |
|
|
Mechatronic Products
